Appvion Résiste SR 3.2 E
| Type | Label stock |
|---|---|
| Maker | Mill |
| Series | Unknown |
| Finish | Unknown |
| Basis weight | 72 gsm |
| Basis weight (lb) | 19.3 lb (writing) |
| Caliper | 81.3 µm |
| Caliper (points) | 3.2 pt |
| Print process | Direct thermal |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Repulpable |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: series, finish, certifications, food contact, minimum order.
Where each value comes from
- Basis weight “g/m2 72 ± 3.6” appvion.com
- Basis weight (lb) “17 x 22–500 (lbs) 19.3 ± 1” appvion.com
- Caliper “3.2 ± 0.2/81.3 ± 4.1” appvion.com
- Caliper “Basis Weight 3.2 ± 0.2/81.3 ± 5” appvion.com
- Caliper (pt) “3.2 ± 0.2/81.3 ± 4.1” appvion.com
- Caliper (pt) “Basis Weight 3.2 ± 0.2/81.3 ± 5” appvion.com
- Print process: Direct thermal “Label Silicone Facestock Release Résiste® SR is a pre-siliconized direct thermal solution that transforms linerless” appvion.com
- Recyclability: repulpable “performance Parker Print Surface <1.9 CD 17 • Repulpable” appvion.com
Source: appvion.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| PB THERM TOP K8P NP FSC | Avery Dennison | Label stock | 72 | 82 | Flexo, Direct thermal | Label | FSC | |
| TOP THERMAL | Frimpeks | Label stock | 70-75 | 65-75 | Direct thermal | Label | ||
| ScanTherm™ Ultra | Spinnaker Coating | Label stock | 72-73 | 79 | Flexo, Direct thermal | Label | ||
| NON-TOP COATED DIRECT THERMAL PAPER | Green Bay Packaging | Label stock | 72.7 | 81.3 | Direct thermal | Label | FSC | |
| Top-Coated DT Rx | Mactac | Label stock | 71 | 76 | Direct thermal | Label | FSC | |
| 130NIR-3 PF | Ricoh | Label stock | 71 | 76 | Direct thermal | Label |