Avery Dennison PB THERM PP100 NG TOP W
| Type | Label stock |
|---|---|
| Maker | Converter |
| Series | Fasson |
| Finish | Unknown |
| Basis weight | 84 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 102 µm |
| Caliper (points) | 4 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Flexo, Direct thermal |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: finish, basis weight (lb), certifications, food contact, recyclability, minimum order.
Where each value comes from
- Basis weight “Basis Weight 84 g/m² ISO 536” pds.averydennison.com
- Caliper “Caliper 102 µm ISO 534” pds.averydennison.com
- Print process: Direct thermal “email to datasheet.mgmt@eu.averydennison.com cause discolouration of the thermosensitive coating. It is” pds.averydennison.com
- Print process: Flexo “…change without prior notice. Further testing is always conversion technologies including flexographic and UV letter recommended.” pds.averydennison.com
Source: pds.averydennison.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| PRESSURETAC Top 2.0 | Sihl | Label stock | 88 | 90 | Flexo, Direct thermal | Label | FSC | |
| ScanTherm™ Industrial | Spinnaker Coating | Label stock | 80 | 84 | Flexo, Direct thermal | Label | ||
| SYN-1 | Ricoh | Label stock | Matt | 76 | 100 | Flexo, Thermal transfer, Direct thermal | Label | |
| Résiste Rx E | Appvion | Label stock | 72.8 | 82.6 | Flexo, Direct thermal | Label | ||
| ECO THERMAL (BPA FREE) | Frimpeks | Label stock | 70-72 | 74-80 | Flexo, Direct thermal | Label | ||
| Trutherm Economy | Tullis Russell | Label stock | 70 | 78 | Flexo, Direct thermal | Label | FSC |