Chiripal Poly Films HR
| Type | Film |
|---|---|
| Maker | Mill |
| Series | Heat Resistant |
| Finish | Unknown |
| Basis weight | 13.7-22.8 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 15-25 µm |
| Caliper (points) | 0.6-1 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Unknown |
| Markets | Unknown |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Recyclable |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: finish, basis weight (lb), print process, markets, certifications, food contact, minimum order.
Where each value comes from
- Basis weight “Unit Weight gm/m² 13.7 16.4 18.2 22.8” chiripalpolyfilms.in
- Caliper “Micron 15.0 18.0 20.0 25.0” chiripalpolyfilms.in
- Caliper “Nominal Thickness (±5%)” chiripalpolyfilms.in
- Recyclability: recyclable “* Sustainable & recyclable solution Coefficient of Friction” chiripalpolyfilms.in
Source: chiripalpolyfilms.in · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| SUPERSEAL 4021 | Super Film | Film | 18.2 | 20 | ||||
| HST-2 (PL) MO | Cosmo Films | Film | 17.5 | 25 | ||||
| LH-TT | Oben Group | Film | 10.9-27.1 | 12-30 | Inkjet, Thermal transfer | Label | ||
| Label-Lyte DL247 | Jindal Films | Film | 17.7-20.5 | 33-38 | Offset, Flexo, Gravure | Label | ||
| PLF-HR | Polibak | Film | 13.6-27.2 | 15-30 | ||||
| SUPET SM-700 | Sumilon | Film | 14-32.2 | 10-23 | Flex pack |