Chiripal Poly Films PLA(70)
| Type | Film |
|---|---|
| Maker | Mill |
| Series | Pearlised label |
| Finish | Unknown |
| Basis weight | 20.2-21.6 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 28-30 µm |
| Caliper (points) | 1.1-1.2 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Unknown |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: finish, basis weight (lb), print process, certifications, food contact, recyclability, minimum order.
Where each value comes from
- Basis weight “Unit Weight (± 5%) gm/m² 20.2 21.6” chiripalpolyfilms.in
- Caliper “Chiripal Poly Films PLA(70) is white 28 30” chiripalpolyfilms.in
- Caliper “Micron” chiripalpolyfilms.in
- Caliper “highly cavitated both side treated, low Nominal Thickness ( ± 5%)” chiripalpolyfilms.in
Source: chiripalpolyfilms.in · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| MVE | Oben Group | Film | 17.5-26.6 | 25-38 | Label | |||
| LBL1-L | Polibak | Film | 19.3-25.9 | 35-47 | Label, Flex pack | |||
| Label-Lyte DL247 | Jindal Films | Film | 17.7-20.5 | 33-38 | Offset, Flexo, Gravure | Label | ||
| SUPEARL 1111 SGL / 1112 SGL | Super Film | Film | 23.6 | 38 | Label | |||
| 30um Transparent BOPP | Fulai | Film | 27 | 31 | Flexo, Letterpress, Screen | Label | ||
| SUPET S-105 | Sumilon | Film | 14-50.4 | 10-36 | Label |