Chiripal Poly Films PUU
| Type | Film |
|---|---|
| Maker | Mill |
| Series | Pearlised |
| Finish | Unknown |
| Basis weight | 17.5-31.5 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 25-45 µm |
| Caliper (points) | 1-1.8 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Unknown |
| Markets | Flex pack |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: finish, basis weight (lb), print process, certifications, food contact, recyclability, minimum order.
Where each value comes from
- Basis weight “Unit Weight (±5%) gm/m² 17.5 21 24.5 28 31.5” chiripalpolyfilms.in
- Caliper “Micron 25 30 35 40 45” chiripalpolyfilms.in
- Caliper “co-extruded both side heat sealable film has Nominal Thickness ( ± 5%)” chiripalpolyfilms.in
Source: chiripalpolyfilms.in · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| ET-AA | Oben Group | Film | 16.8-32.2 | 12-23 | Flexo, Gravure | Flex pack | ||
| SUPET S-107 | Sumilon | Film | 16.8-32.2 | 12-23 | Flex pack | |||
| PETLAIN BT 1012 CP | Super Film | Film | 16.8-32.2 | 12-23 | Flex pack | |||
| PRMZ | Polibak | Film | 23.8-25.8 | 35-38 | Flex pack | |||
| Printing base film | Billion | Film | 12-75 | Flex pack | ||||
| Co-polyester coated packaging film | Garware | Film | 10-12 | Flex pack |