Hueck Folien Transparent and coloured VOID
| Type | Film |
|---|---|
| Maker | Converter |
| Series | VOID |
| Finish | Clear |
| Basis weight | Unknown |
| Basis weight (lb) | Unknown |
| Caliper | 12-80 µm |
| Caliper (points) | 0.5-3.1 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Unknown |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: basis weight, basis weight (lb), print process, certifications, food contact, recyclability, minimum order.
Where each value comes from
- Caliper “Available on PET 12 – 75 μm (0.47 – 2.95 mil), OPP 30 – 50 μm (1.18 – 1.97 mil), PE-LD 80 μm (3.15 mil) with topcoats for different printing methods” hueck-folien.com
Source: hueck-folien.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| PolyTherm E Clear 300-3.3 | Appvion | Film | Clear | 69.1 | 76 | Direct thermal | Label | |
| EMCL clear polyester film | Garware | Film | Clear | 12-350 | Label, Flex pack | |||
| 2 MIL CLEAR ACETATE | Green Bay Packaging | Film | Clear | 50.8 | Label | |||
| BFY Clear Non Heat Sealable (PSA Label Facestock) | Inteplast Group | Film | Clear | 40-50 | Label | |||
| 1.5 mil Transparent Polystyrene | Mactac | Film | Matt, Clear | 38 | Flexo | Label | ||
| Indigo Printable PET film | NAISI | Film | Gloss, Metallic, Clear | 75-180 | HP Indigo | Commercial, Label |