Kanzaki KL475Rx
| Type | Specialty paper |
|---|---|
| Maker | Mill |
| Series | DT Label |
| Finish | Unknown |
| Basis weight | 57-72 gsm |
| Basis weight (lb) | 15-19 lb (writing) |
| Caliper | 58-76 µm |
| Caliper (points) | 2.3-3 pt |
| Print process | Direct thermal |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Unknown |
Unknown means the sources we read don't state it: finish, certifications, food contact, recyclability, minimum order, datasheet.
Where each value comes from
- Basis weight “KL475Rx 72.0 (g/m2)” kanzakiusa.com
- Basis weight “KL475Rx23 57.0 (g/m2)” kanzakiusa.com
- Basis weight (lb) “KL475Rx 19# (17"x22" x 500)” kanzakiusa.com
- Basis weight (lb) “KL475Rx23 15# (17"x22" x 500)” kanzakiusa.com
- Caliper “KL475Rx 3.00 mils | 76 µm” kanzakiusa.com
- Caliper “KL475Rx23 2.30 mils | 58 µm” kanzakiusa.com
- Caliper (pt) “KL475Rx 3.00 mils | 76 µm” kanzakiusa.com
- Caliper (pt) “KL475Rx23 2.30 mils | 58 µm” kanzakiusa.com
- Print process: Direct thermal “COMMERCIAL DIRECT THERMAL LABEL SOLUTIONS” kanzakiusa.com
Source: kanzakiusa.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| KLS 4xx | KANZAN | Specialty paper | 55-72 | 63-82 | Offset, Flexo, Letterpress, Direct thermal | Label | ||
| KT LFA | Koehler | Specialty paper | 61-70 | 70-77 | Direct thermal | Label | ||
| JujoL-KME3 | Nippon Paper | Specialty paper | 62 | 73 | Direct thermal | Label | ||
| LB380B | Mitsubishi Paper Mills | Specialty paper | 85 | Direct thermal | Label | |||
| KLT30-1H | Oji | Specialty paper | 80 | Direct thermal | Label | |||
| Termax TCLLX | Lecta | Specialty paper | 59-72 | 64-76 | Offset, Flexo, Direct thermal | FSC, PEFC |