Mactac Optiscan V Thermal Transfer Paper
| Type | Label stock |
|---|---|
| Maker | Converter |
| Series | Unknown |
| Finish | Unknown |
| Basis weight | Unknown |
| Basis weight (lb) | Unknown |
| Caliper | 64 µm (derived from pt (1 pt = 25.4 µm)) |
| Caliper (points) | 2.5 pt |
| Print process | Thermal transfer |
| Markets | Label |
| Certifications | FSC |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: series, finish, basis weight, basis weight (lb), food contact, recyclability, minimum order.
Where each value comes from
- Caliper (pt) “Caliper, inches 0.0025 +/- 10% ISO 534” d3fdliptobc9c1.cloudfront.net
- Caliper (pt) “Caliper, inches 0.0025 +/- 10% ISO 534” d3fdliptobc9c1.cloudfront.net
- Print process: Thermal transfer “"label": "Print Method" … "valueDisplay": "Thermal Transfer"” mactac.com
- Certification: FSC “www.mactac.com FSC® TTV1752-7 Rev: 5/2025 EAS” d3fdliptobc9c1.cloudfront.net
Source: mactac.com · checked 2026-10-19
Also checked: d3fdliptobc9c1.cloudfront.net
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| 3690E | 3M | Label stock | Gloss | 50 | UV inkjet, Screen, Thermal transfer | Label | ||
| AF185 PE85 WHITE | Avery Dennison | Label stock | 84 | 82 | Offset, Flexo, Gravure, Letterpress, Screen, Thermal transfer | Label | ||
| 10 Mil High End Synthetic Paper | Beontag | Label stock | 254 | Offset, Flexo, Gravure, Thermal transfer | Label | |||
| SigmaKoat ED | Duraco Specialty Materials | Label stock | Matt | 51 | Offset, Flexo, Letterpress, Screen, Thermal transfer | Label | ||
| Thermal Transfer paper labelstocks | Fangda | Label stock | Thermal transfer | Label | FSC | |||
| COATED BOARD FSC | Frimpeks | Label stock | 130 | 98 | Thermal transfer | Label | FSC |