Mactac Tire Label Top-Coated Polypropylene (PP)
| Type | Label stock |
|---|---|
| Maker | Converter |
| Series | Unknown |
| Finish | Unknown |
| Basis weight | Unknown |
| Basis weight (lb) | Unknown |
| Caliper | 66 µm (derived from pt (1 pt = 25.4 µm)) |
| Caliper (points) | 2.6 pt |
| Print process | Flexo |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: series, finish, basis weight, basis weight (lb), certifications, food contact, recyclability, minimum order.
Where each value comes from
- Caliper (pt) “"label": "Thickness" … "valueDisplay": "2.6 mil"” mactac.com
- Print process: Flexo “"label": "Print Method" … "valueDisplay": "Flexographic"” mactac.com
Source: mactac.com · checked 2026-10-19
Also checked: d3fdliptobc9c1.cloudfront.net, d3fdliptobc9c1.cloudfront.net, d3fdliptobc9c1.cloudfront.net, d3fdliptobc9c1.cloudfront.net
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| Résiste Rx E | Appvion | Label stock | 72.8 | 82.6 | Flexo, Direct thermal | Label | ||
| 2MIL TREATED PET CLEAR | Avery Dennison | Label stock | Clear | Offset, Flexo, Gravure, Letterpress, Screen | Label | |||
| 10 Mil High End Synthetic Paper | Beontag | Label stock | 254 | Offset, Flexo, Gravure, Thermal transfer | Label | |||
| SigmaKoat ED | Duraco Specialty Materials | Label stock | Matt | 51 | Offset, Flexo, Letterpress, Screen, Thermal transfer | Label | ||
| Matt BOPP film labelstocks | Fangda | Label stock | Matt | Flexo, Gravure, Letterpress, Screen | Label | |||
| ECO THERMAL | Frimpeks | Label stock | 70 | 75 | Flexo, Direct thermal | Label |