Sihl ENDURO Extra K
| Type | Unknown |
|---|---|
| Maker | Converter |
| Series | ENDURO |
| Finish | Unknown |
| Basis weight | 125 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 145 µm |
| Caliper (points) | 5.7 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Offset, Digital toner, Flexo, Thermal transfer |
| Markets | Commercial, Label |
| Certifications | FSC |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: type, finish, basis weight (lb), food contact, recyclability, minimum order.
Where each value comes from
- Basis weight “Weight [g/m²] Value 125” sihl.com
- Caliper “Thickness (total) [µm] Value 145” sihl.com
- Print process: Flexo “Technologies: Flexo printing, Laser printing, Offset printing, Thermal transfer printing” sihl.com
- Print process: Digital toner “Technologies: Flexo printing, Laser printing, Offset printing, Thermal transfer printing” sihl.com
- Print process: Offset “Technologies: Flexo printing, Laser printing, Offset printing, Thermal transfer printing” sihl.com
- Print process: Thermal transfer “Technologies: Flexo printing, Laser printing, Offset printing, Thermal transfer printing” sihl.com
- Certification: FSC “Certificates FSC FSC” sihl.com
Source: sihl.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.