Sihl ENDURO MD SHIELD OBF
| Type | Unknown |
|---|---|
| Maker | Converter |
| Series | ENDURO |
| Finish | Unknown |
| Basis weight | 167 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 207 µm |
| Caliper (points) | 8.1 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Offset, Flexo |
| Markets | Label |
| Certifications | FSC |
| Food contact | Yes |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: type, finish, basis weight (lb), recyclability, minimum order.
Where each value comes from
- Basis weight “Weight [g/m²] Value 167” sihl.com
- Caliper “Thickness (total) [µm] Value 207” sihl.com
- Print process: Flexo “Technologies: Flexo printing, Offset printing” sihl.com
- Print process: Offset “Technologies: Flexo printing, Offset printing” sihl.com
- Certification: FSC “It is PVC-free and FSC®-certified. An affordable and sustainable alternative to synthetic products.” sihl.com
- Food contact “Good manual writability , good temperature resistance Declaration of Compliance for food contact possible” sihl.com
Source: sihl.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.