Spinnaker Coating ScanTherm™ NTC
| Type | Label stock |
|---|---|
| Maker | Converter |
| Series | Unknown |
| Finish | Unknown |
| Basis weight | 75 gsm (derived from lb (text basis)) |
| Basis weight (lb) | 51 lb (text) |
| Caliper | 84 µm (derived from pt (1 pt = 25.4 µm)) |
| Caliper (points) | 3.3 pt |
| Print process | UV inkjet, Flexo, Direct thermal |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Unknown |
Unknown means the sources we read don't state it: series, finish, certifications, food contact, recyclability, minimum order, datasheet.
Where each value comes from
- Basis weight (lb) “Basis Weight: 51 #/3300 ft ²” spinnakercoating.com
- Caliper (pt) “Caliper: 3.3 mils” spinnakercoating.com
- Print process: Direct thermal “Thermal Direct: Good” spinnakercoating.com
- Print process: Flexo “Flexo: Good” spinnakercoating.com
- Print process: UV inkjet “Ink Jet - EFI Jetrion/UV: Recommended for barcodes and text (not full color)” spinnakercoating.com
Source: spinnakercoating.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| PB THE P TOP S10D NP FSC | Avery Dennison | Label stock | 75 | 74 | Flexo, Thermal transfer, Direct thermal | Label | FSC | |
| DiversiPrint | Mactac | Label stock | Uncoated | 67-83 | 89 | Digital toner, Inkjet, UV inkjet, Flexo | Label | |
| Direct Thermal Paper SA | SICOL | Label stock | Offset, HP Indigo, UV inkjet, Flexo, Letterpress, Direct thermal | Label | ||||
| SYN-1 | Ricoh | Label stock | Matt | 76 | 100 | Flexo, Thermal transfer, Direct thermal | Label | |
| Résiste Rx E | Appvion | Label stock | 72.8 | 82.6 | Flexo, Direct thermal | Label | ||
| ECO THERMAL (BPA FREE) | Frimpeks | Label stock | 70-72 | 74-80 | Flexo, Direct thermal | Label |