Avery Dennison THERMAL TOP S8 OPQ BLUE
| Type | Label stock |
|---|---|
| Maker | Converter |
| Series | Fasson |
| Finish | Unknown |
| Basis weight | 76 gsm |
| Basis weight (lb) | Unknown |
| Caliper | 75 µm |
| Caliper (points) | 3 pt (derived from µm (1 pt = 25.4 µm)) |
| Print process | Flexo, Direct thermal |
| Markets | Label |
| Certifications | Unknown |
| Food contact | Unknown |
| Recyclability | Unknown |
| Minimum order | Unknown |
| Datasheet | Datasheet |
Unknown means the sources we read don't state it: finish, basis weight (lb), certifications, food contact, recyclability, minimum order.
Where each value comes from
- Basis weight “Basis Weight 76 g/m² ISO 536” pds.averydennison.com
- Caliper “Caliper 75 µm ISO 534” pds.averydennison.com
- Print process: Direct thermal “BA083 protective coating. The black imaging thermosensitive coating” pds.averydennison.com
- Print process: Flexo “…atically generated datasheet. All data to be considered as typical technologies including flexographic and UV letter press. values and subject to change without prior notice. Further testing is always” pds.averydennison.com
Source: pds.averydennison.com · checked 2026-10-19
We only record what the sources state. Spot an error, or make this substrate? Send a correction.
Similar grades from other makers
| Grade | Brand | Type | Finish | gsm | Caliper (µm) | Process | Markets | Certifications |
|---|---|---|---|---|---|---|---|---|
| SYN-1 | Ricoh | Label stock | Matt | 76 | 100 | Flexo, Thermal transfer, Direct thermal | Label | |
| ScanTherm™ NTC | Spinnaker Coating | Label stock | 75 | 84 | UV inkjet, Flexo, Direct thermal | Label | ||
| Résiste Rx E | Appvion | Label stock | 72.8 | 82.6 | Flexo, Direct thermal | Label | ||
| ECO THERMAL (BPA FREE) | Frimpeks | Label stock | 70-72 | 74-80 | Flexo, Direct thermal | Label | ||
| Trutherm Economy | Tullis Russell | Label stock | 70 | 78 | Flexo, Direct thermal | Label | FSC | |
| PRESSURETAC Top 2.0 | Sihl | Label stock | 88 | 90 | Flexo, Direct thermal | Label | FSC |